If you haven't done so already, follow the instructions for QMX-Server Configuration, and SambaPOS Configuration.

Now it is time to run the QMX (client) Application on your device. This is done by using a Browser such as Chrome (recommended), Firefox, Safari, Internet Explorer, or Edge.

Open your preferred Browser and enter the address to the QMX-Server into the address bar. For example, if you installed QMX-Server on a SambaPOS Server Computer named "MYSERVER" and configured it to run on Port 3000 (default), then enter the following in the address bar (be sure to include the "QMX" portion of the address):

http://MYSERVER:3000/QMX/

QMX client Server Address by Host Name

We can also use the IP Address of the SambaPOS Server Computer ...

http://192.168.1.110:3000/QMX/

QMX client Server Address by IP Address





When the QMX client connects for the first time, it will prompt for the QMX App User and Password, followed by a Regular User PIN Login that was set up in SambaPOS Configuration.

The default APP Username is QMXuser but it has NO PASSWORD. You need to EDIT this User in SambaPOS and set a Password for this User. The REGULAR User PIN can be any User that is registered in SambaPOS.
QMX App User Password LoginQMX Regular User PIN Login




Upon the first successful Authentication and Login, you will be automatically directed to the QMX Core configuration, which contains settings that are essential to proper System Operation.

All Modules also have their own settings so we can customize Module operations, but prior to that, we must ensure the Core configuration is set up properly.

Configuration can be accessed at any time through the Menu Icon at the top-right of the Screen ...
QMX Configuration Menu



Core
Core configuration contains basic settings for communicating with the SambaPOS Messaging Server.
QMX Core Configuration
  • Message Server Port
    This parameter needs to be set to match the that we configured in the SambaPOS Messaging Server Service Tool (default:
    9000
    ).
  • Application Id
    This parameter needs to be set to match the that we configured in SambaPOS (default:
    QMXapp
    ).
  • APP User
    This parameter needs to be set to match the that we configured in SambaPOS (default:
    QMXuser
    ).